宣工 TYS165-2 濕地推土機參數配置
宣工 TYS165-2 濕地推土機技術參數
TYS165-2濕地推土機
TYS165-2濕地推土機性能簡介
TYS165-2 LGP Bulldozer
TYS165-2濕地推土機係半剛性懸掛、液力傳動、液壓操縱的履帶推土機。特別適用於含水比較高、鬆軟、粘性土質工況下作業。
TYS165-2 bulldozer is semi-rigid suspended, power shift, hydraulically controlled and track-type. It is applicable for watery, soft, viscous soil conditions.
主機性能參數(標準型：直傾鏟)
Main specifications (Standard type: straight dozer)
外形尺寸(長×寬×高) 5585×4222×3190 mm (含履刺)
使用質量 18.3 t
飛輪功率 121 kW
最大牽引力 143.4 kN
(有效牽引力取決於機重和地麵附著性能)
接地壓力（使用重量） 28.3 KPa
最小轉彎半徑 4.0 m
最小離地間隙 382.5 mm
坡行角度 縱向 30度 橫向 25度
Overall dimensions (L×W×H) : 5585×4222×3190 mm
Operation weight: 18.3 t
Flywheel power: 121 kW
Max. drawbar pull: 143.4 kN
(The efficient force depends on weight and ground surface adherence)
Ground pressure (at operating weight): 28.3 KPa
Min. ground radium: 4.0 m
Min. ground clearance: 382.5 mm
Grade ability: Straight 30° Side 25°
柴油機
Diesel engine
製造廠家 上海柴油機股份有限公司
型號 C6121ZG05p
形式 水冷、單行、立式、四衝程、渦輪增壓
缸數--缸徑X行程 6-120.7×152.4mm
總排量 10.5 L
標定功率 131 kW
額定轉速 1900 r/min
油耗(標定功率時)
燃油消耗量 ≤220 g/kW·h
機油消耗量 ≤1.2 g/kW·h
最大扭矩(≤1400r/min) ≥790N.m
冷卻方式 閉式循環水冷卻
啟動方式 24V電啟動
Manufactured factory: SHANGHAI DIESEL ENGINE CO., LTD
Model: C6121ZG05p
Type: water-cooled, single-row, vertical, 4-stroke-cycle, turbo-charged
Number of cylinders-bore×stroke: 6-120.7×152.4mm
Total piston displacement: 10.5 L
Rated RPM: 1900 r/min
Rated power: 131 kW
Oil consumption (at rated power output)
Fuel consumption: ≤220 g/kW·h
Lube oil consumption: ≤1.2 g/kW·h
Max. torque (≤1400r/min): ≥790 N·m
Cooling method: closed circulation water cooling
Starting method: by electric at 24V
製造廠家 維柴動力股份有限公司
型號 WD615.T1-6
形式 水冷、單行、立式、四衝程、渦輪增壓
缸數--缸徑X行程 6-126╳130mm
總排量 9.726L
標定功率 131kW
額定轉速 1900r/min
油耗(標定功率時)
燃油消耗量 ≤215g/kW.h
機油消耗量 ≤1.72g/kW.h
最大扭矩(≤1400r/min) ≥790N.m
冷卻方式 閉式循環水冷卻
啟動方式 24V電啟動
Manufactured factory: WEIFANG DIESEL ENGINE CO., LTD
Model: WD615.T1-6
Type: water-cooled, single-row, vertical, 4-stroke-cycle, turbo-charged
Number of cylinders-bore╳stroke: 6-126╳130mm
Total piston displacement: 9.726L
Rated RPM: 1900r/min
Rated power: 131kW
Oil consumption (at rated power output)
Fuel consumption: ≤215g/kW.h
Lube oil consumption: ≤1.72g/kW.h
Max. torque (≤1400r/min): ≥790N.m
Cooling method: closed circulation water cooling
Starting method: by electric at 24V
變矩器與變速箱
Torque converter and transmission
變矩器為單級三元件結構。輸出動力平穩，具有良好性能。
變速箱為行星齒輪傳動，動力換檔變速箱。前進三檔，後退三檔。可實現擋位和方向的快速變換。(按柴油機1900r/min時理論速度)
行駛速度
前進一檔 0—3.59 km/h 後退一檔 0—4.33 km/h
前進二檔 0—6.76 km/h 後退二檔 0—8.90 km/h
前進三檔 0—12.37km/h 後退三檔 0—14.96km/h
Single-stage, three unites structure torque converter.
output power is stable with high performance.
Planetary, power shift transmission with three speeds forward and three speeds reverse. Speed and direction can be quickly shifted.
Travel speed (in theory 1900/min engine speed ):
Forward Reverse
First speed 0—3.59 km/h First speed 0—4.33 km/h
Second speed 0—6.76 km/h Second speed 0—8.90 km/h
Third speed 0—12.37km/h Third speed 0—14.96km/h
轉向與製動
Steering and braking
轉向離合器為濕式、多片、粉末冶金摩擦片、彈簧壓緊、液壓分離。
製動器為濕式、浮動、雙向帶式、腳踏式機械操縱，液壓助力，可實現轉向與製動聯動
The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.
The brakes are oil, two-direction floating band with mechanism foot pedals, hydraulic boosted. The steering and braking can be actuated in one control.
變速、轉向製動操縱：
Transmission, steering and braking operation
變速、轉向製動操縱采用單杆操縱，一個手柄可實現推土機前進三檔、後退三檔的變速控製和左、右轉向及製動控製。
The operation of transmission , steering and braking is controlled by single lever . Transmission, left and right steering and braking can be realized for three speeds forward and three speeds reverse by one handle .
最終傳動
Final drive
兩級直齒輪減速，浮動油封密封，鏈輪采用組合式，便於維修。
The final drives are double reduction with spur gear and segment sprocket, which are sealed by duo-cone seal
行走係統
Undercarriage system
行走架為槽鋼鋼板焊接矩形截麵，八字梁型式。支重輪、托鏈輪、引導輪均裝有密封性能好、壽命長的浮動油封。
單側支重輪數量 單邊4個，雙邊3個
單側托鏈輪數量 2個
單側引導輪數量 1個
履帶型式 三角截麵、寬幅、組合式。
履帶漲緊型式 液壓漲緊
節距 203 mm
單側履帶板數量 43塊
履帶板寬度 1070mm
履帶接地長度 3020mm
密封和潤滑履帶 （可選購件）
該履帶的節距、履帶板數量、履帶板寬度與普通履帶相同。
The undercarriage is section steel welded track roller frame with diagonal
brace.
The track rollers, carrier rollers and front idlers have the same floating seals which are long-service life and seal well.
Number of track rollers: 4 single-flange on each side
3 double-flange on each side
Number of carrier roller : 2 on each side
Number of front idler: one on each side
Track type: triangle section, modular type.
Track adjuster type: by hydraulically adjust
Pitch: 203 mm
Numbers of shoe: 43
Width of shoe: 1070mm
Length of track on ground: 3020mm
Sealed and lubricated track (0ptional parts)
The pitch, number of shoes, width of shoe are the same with ordinary track
工作裝置液壓係統
Implement hydraulic system
由雙聯齒輪油泵、先導閥、主閥組及油缸、濾油器和管路組成
油泵型式 雙聯齒輪油泵
油泵流量 前泵190 L/min 先導泵 19 L/min
係統壓力 12 MPa
It consists of two group gear pump ,pilot valve, main valve , cylinders, oil filter and lines.
Pump type: two group gear oil pump
Pump flow :
Front pump : 190L/min Pilot pump :19L/min
System pressure: 12MPa
底盤液壓係統
Basic hydraulic system
油泵型式 齒輪油泵
油泵流量 135 L/min
係統壓力 2.35MPa
Pump type: gear oil pump
System output: 135 L/min
System pressure: 2.35MPa
駕駛室
Cab
噪音低、視野寬闊、可調式的司機座椅，並配備電風扇。
備有以下駕駛室供用戶選用
1. 帶空調器的駕駛室。
2. 翻車保護司機涼棚。
3. 防翻架。
The cab with adjustable seat features low noise and wide visible range and contains electrical fan.
The different kinds of cabs as follow can be chosen:
1. Cab with air-conditioner
2. Cab with Rops canopy
3. Rops.
加注容量
Service refill
加注部位 容量（L）
水箱及柴油機冷卻水 60
柴油機潤滑係統用油 27.5
分動箱、變矩器 變速箱、後橋傳動用油 95
最終傳動用油（單側） 24
工作裝置液壓係統用油 80
柴油箱裝柴油 285
支重輪、托鏈輪、引導輪用油（每個） 0.35
Fill location Capacity(L)
Radiator and diesel engine water: 60
Lubricating system of diesel engine Oil: 27.5
Flywheel house, Torque converter ,
Transmission, bevel gear case Oil: 95
Final drive(each side) Oil: 24
Implement hydraulic system Oil: 85
Fuel tank Oil: 285
Track roller, carrier roller, front idler(each) Oil: 0.35
推土鏟主要參數
Blade specifications
鏟刀型式 （Blade） 直傾鏟(Straight)
鏟刀寬度（Width） 4222 mm
鏟刀高度（Height） 1035 mm
最大切土深度（Max digging depth）: 400mm
最大提鏟高度（Max. ground clearance）: 957mm
垂直傾斜角Tilting angle: 8.5°
鏟刀容量（Blade capacity）: 4.5m3
鬆土器主要參數：
Ripper specifications
鬆土齒數： 3個
長 ： 1580mm
寬： 2020mm
高： 1236mm
最大鬆土深度： 550mm
最大提升高度： 510mm
Number of shank : three
Length : 1580mm
Width : 2020mm
Max. Penetration depth : 550mm
Max. Lifting height : 510mm
注：本頁麵型號參數配置等信息僅供參考，實際型號參數配置等信息以店內銷售為準，解釋權歸生產廠家所有。
