宣工 T165-1  推土機參數配置

                                T165-1

 

 

T165-1推土機係半剛性懸掛、機械傳動、液壓操縱的履帶推土機。可用於道路修築、水電工程、農田改造、港口建設礦山開發及其它建築工程項目的土石方作業。

 

T165-1 bulldozer is semi-rigid suspended, power shift, hydraulically controlled and track-type. It is applicable for road construction, water and electricity engineering farmland leveling, port building, mining and other engineering conditions.

 

 

外形尺寸(長×寬×高)    　5336×3297×2882 mm (直傾鏟)

                          5336×3726×2882 mm (角鏟)

使用質量    　　　　　　　16.9t(直傾鏟)；17t(角鏟)

飛輪功率    　　　　　　　121 kW

最大牽引力   　　　　　　 132.5 kN（直傾鏟）；133.3kN（角鏟）

(有效牽引力取決於機重和地麵附著性能)

 接地壓力（使用質量）     64.4KPa

最小轉彎半徑　　　　　　　3.9 m

最小離地高度  　　　　　　352.5 mm

坡行角度　　　　　　　　　縱向 30度　　橫向 25度

單鏟容量                  4.5 m³(直傾鏟);4.9m³ (角鏟)

Overall dimensions (L×W×H) :   5336×3297×2882 mm (straight)

                                5336×3726×2882 mm (angle )

Operation weight:     16.9t(straight);17t(angle )

Flywheel power:       121kW

Max. drawbar pull:    132.5 kN（straight）；133.3kN（angle）

(The efficient force depends on weight and ground surface adherence)

 Ground pressure (at operating weight):   64.4KPa

Min. ground radium:      3.9 m

Min. ground clearance:   352.5 mm

Grade ability:   Straight 30°　　

                 Side     25°

 

 

Diesel engine

 

製造廠家：                  濰坊柴油機股份有限公司       

形式  　　　　　　          直列、水冷、四衝程、增壓、直噴

缸數--缸徑×行程 　          6-126×130

總排量　　　　　　          9.726L

額定轉速                    1800 r/min

標定功率                    130  kW

最大扭矩/轉率               870N·m/1200-1300rpm

燃油消耗量（標定功率）      ≤225 g/kW·h

機油消耗量                  ≤1.8 g/kW·h

許用海拔                    ≤4000m

冷卻方式                    閉式循環水冷卻

啟動方式                    24V電啟動

 

Manufactured  factory:     WEIFANG DIESEL ENGINE CO.,LTD

Model:               WD615T1-3B

Type:   straight line, water-cooled, with four stroke, pressure boost and direct injection

Cylinders Number-bore diameter×travel distance:   6-126x130mm

Displacement:                         9.726 L

Rated RPM:                            1800  r/min

Rated power:                          130   kW

Max. torque                           870 N·m/1200-1300 rpm

Fuel  consumption (at rated working condition)

                                225 g/kW·h

oil consumption:                    1.8 g/kW·h

Admissible altitude                  ≤4000m

Cooling method:   closed circulation water cooled

Starting method:   electrically starting  at 24V  pressure  

 

製造廠家：                            上海柴油機股份有限公司 

形式  　　　　　　                    直列水冷四衝程增壓

缸數--缸徑×行程 　                    6-135×150

總排量　　　　　　                    12.88 L

額定轉速                              1800  r/min

標定功率                              130   kW

最大扭矩/轉速                         838 N·m/1260 rpm

燃油消耗量（標定功率）                224 g/kW·h

機油消耗量                            0.7 g/kW·h

許用海拔                             ≤4000m

冷卻方式                             閉式循環水冷卻

啟動方式                             24V電啟動

 

Manufactured  factory:                SHANGHAI  DIESEL ENGINE CO.,LTD

Model:                               G128ZG8

Type:   straight line, water-cooled, with four stroke, 

Cylinders Number-bore diameter×travel distance:   6-135x150mm

Displacement:                            12.88 L

Rated RPM:                               1800  r/min

Rated power:                             130  kW

Max. torque                              838 N·m/1260 rpm

Fuel  consumption (at rated working condition)

                                   224 g/kW·h

oil consumption:                       0.7 g/kW·h

Admissible altitude                      ≤4000m

Cooling method:   closed circulation water cooled

Starting method:   electrically starting  at 24V  pressure

 

 

主離合器為常開式，多片濕式粉末冶金摩擦片，液壓助力操縱。

變速箱采用常齧合，斜齒輪傳動，結合套換檔，雙杆機械操縱。前進五檔，後退四檔。

行駛速度：（柴油機1800r/min時理論速度）

前進：一擋 2.5km/h            後退：一擋 3.5km/h

      二擋 3.3km/h                  二擋 4.6km/h

      三擋 5.7km/h                  三擋 7.9km/h

      四擋 7.5km/h                  四擋 10.5km/h

      五擋 10.6km/h

 

  The flywheel clutch is constantly disengaged with muti-powder-metal discs,  which is operted by hydraulically boosting,.

The transmission is mechanical double levels controlled with constantly meshed helical gears, and coupling sleeve shift. It has five speeds FORWARS and four speeds  REVERSE .

Travel speed (in theory 1800r/min engine speed)

Forward                                 Reverse

First  speed    2.5km/h                     First  speed      3.5km/h

Second speed   3.3km/h                     Second speed      4.6km/h

Third speed     5.7km/h                     Third speed       7.9m/h

Forth speed     7.5km/h                     Forth speed       10.5km/h

Fifth speed     10.61km/h

 

 

轉向離合器為濕式、多片、粉末冶金摩擦片、彈簧壓緊、液壓分離。

製動器為濕式、浮動、雙向帶式、腳踏式機械操縱.

 The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.

The brakes are oil, two-direction floating band with mechanism foot pedals。  

 

 

兩級直齒輪減速，浮動油封密封，鏈輪采用組合式，便於維修。

The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal  for easy service.

 

 

 

行走架為槽鋼焊接矩形截麵，八字梁型式。支重輪、托鏈輪、引導輪均裝有密封性好、壽命長的浮動油封。

支重輪（每側）

      單邊                四個

      雙邊                二個

托鏈輪（每側）            二個

引導輪（每側）            一個

履帶型式                  單履齒組合式

履帶漲緊型式              液壓漲緊

節矩                      203 mm

履帶板數（每側）          38 塊

履帶板寬                  500 mm

履帶接地長度              2570 mm

密封和潤滑履帶▲

該履帶的節距、履帶板數、履帶板寬與普通的履帶相同。

 

Inner and outer beam of track roller frame are rectangular section “八”frame .Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal.

Track roller (each side):

Singe flange             4

Double flange           2

Carrier roller(each side):       2

Idler (each side)              1

Type of track:               single grouser combined

Tension mode of track:       hydraulic

Pitch:                     203mm

Number of shoes(each side)    38 pieces

Width of shoe               500mm

Length of track on ground      2570mm

Sealed and lubricated track ▲

The pitch , numbers and width of track shoes are the same with the general track.

 

 

 

由裝置油泵、液壓油箱及各種閥、油缸、濾油器和管路組成。

油泵型式            齒輪油泵

油泵型號            CBF-E100A （反）

係統流量               180 L/min  

係統壓力              11.76 MPa   

單閥（內置）：用於角鏟、推煤鏟。可實現鏟刀油缸的提升、封閉、下降、浮動。

雙閥（內置）：用於直傾鏟。可實現鏟刀油缸的提升、封閉、下降、浮動，同時實現側傾缸左側傾、右側傾、封閉。

雙閥（一個內置、一個外置）：用於角鏟、鬆土器。可實現鏟刀油缸的提升、封閉、下降、浮動，鬆土油缸可實現提升、封閉、下降。

三閥（二個內置、一個外置）：用於直傾鏟、鬆土器。可實現鏟刀油缸的提升、封閉、下降、浮動，同時實現側傾缸左側傾、右側傾、封閉。鬆土油缸可實現提升、封閉、下降。

Hydraulic system of the implement

It consists of implement pump , hydraulic tank and various valves , cylinders , filters and lines .

Pump type                       gears oil pump

Pump model                      CBF-E100A(reverse)

System output                    180L/min  

System pressure                    11.76MPa     

Single valve(built in):used in angle blade, coal pushing blade to control lift, hold, lower, float for the blade cylinder.

Double valve (built in: used in straight blade to control lift, hold, lower. Float for blade cylinder, at same time to realize left tilting, right titling, hold of titling cylinder.

Double valve (one built-in, another at outside): used in angle blade, ripper to realize lift, hold , lower, float for the blade cylinder and to realize lift, hold, lower for the ripper cylinder.

Three valves: (two built-in, one at outside) used in straight blade to realize lift, hold, lower, float for blade cylinder at same time to realize left titling, right tilting, hold for titling for titling cylinder. Ripper cylinder can move to lift. Hold, lower positions.

 

 

 

噪音低、視野寬闊、可調式的司機座椅，並配備電風扇。

備有以下駕駛室供用戶選用

1. 帶空調器的駕駛室。

2. 翻車保護司機涼棚。

3．簡易司機涼棚。

The cab with adjustable seat features low noise and wide visible range and contains electrical fan.

This following different kinds of cabs as follow can be chosen:

1. Cab with air-conditioner

2. Cab with Rops  

3. Simple structure canopy

 

 

加注部位                               容量（L）

水箱及柴油機冷卻水                      60

柴油機潤滑係統用油                      25

分動箱、主離合器用油                    35

變速箱、後橋傳動用油                    90

最終傳動用油（單側）                    24

工作裝置液壓係統用油                    85

柴油箱裝柴油                            230

支重輪、托鏈輪、引導輪用油（每個）      0.35

 

 

Fill location                                                Capacity(L)

Radiator and diesel engine water:                                  60

Lubricating system of diesel engine             Oil:               25

Flywheel house, main clutch oil                                    35  ,

Transmission, bevel gear case                    Oil:              90

Final drive(each side)                           Oil:              24

Implement hydraulic system                       Oil:              85

Fuel tank                                        Oil:              230

Idle track roller, carrier roller, front idler(each)  Oil:         0.35

 

 

 

鏟刀型式                           角鏟        直傾鏟   推煤鏟

Blade                             Angle        Straight     Coal pushing

鏟刀寬度（Width）                  3762mm       3297 mm     4240mm

鏟刀高度（Height）                 1140mm       1170 mm     1150mm

最大切削深度（Max digging depth）:  400mm       400mm

最大提升高度（Max. ground clearance）:1000mm     915mm       1000mm

垂直傾斜角(Vertical tilting angle):      9°      8.5°            9° 

 

鬆土器主要參數：

 

鬆土齒數(Number of shand)      3個               1

長(length) ：                  1580mm            1580mm

寬(width)：                    2020mm            1090mm

高(Height)：                   1236mm            1236mm