泉州泉港移動螺杆空壓機租賃

泉州泉港移動螺杆空壓機租賃廈門川野機械有限公司張經理：I59 8O88 5OI6。
泉州泉港移動螺杆空壓機租賃Time：2019-08-06 09:39:18???????來源：
　　螺杆空壓機在正常使用中有溫度。如果溫度高於5-8，說明油流不足，油路堵塞，或者溫控閥沒有完全打開。請檢查機油濾清器。

　　Screw air compressor has temperature in normal use. If the temperature is higher than 5-8, the oil flow is insufficient, the oil pipeline is blocked, or the temperature control valve is not fully opened. Please check the oil filter.
　　如果溫差小於正常範圍,證明了冷卻,水冷機,請檢查是否缺水,水溫過高,水冷卻器水垢、是否內部冷卻油垢,風冷,請檢查散熱器是否太髒,是否異常冷卻風扇,風量,是否有管導管堵塞,是否管太長,不是接力風機,繼電器風扇沒有打開或繼電器風扇的錯。
　　If the temperature difference is less than the normal range, it proves that the cooling and water cooler are short of water, the water temperature is too high, the scale of the water cooler, the internal cooling grease scale and the air cooling, please check whether the radiator is too dirty, whether the abnormal cooling fan, the air flow, whether the pipe duct is blocked, whether the pipe is too long, not the relay fan is not turned on or not. The fault of relay fan.
一些模型油流量調整,請調整到大,檢查溫控閥是否正常,您可以刪除閥芯,關閉溫控閥頭,迫使油冷卻器,如果上麵的方法無法解決,我們將考慮是否有異物阻塞石油路。
　　Some model oil flow adjustments, please adjust to the maximum, check whether the temperature control valve is normal, you can delete the spool, close the temperature control valve head, force the oil cooler, if the above method can not be solved, we will consider whether there is foreign matter blocking the oil pipeline.
　　散熱器是否有油脂。如果溫度差異是在正常範圍內,機器仍然是高溫,表明熱頭產生的超出了正常範圍,應檢查是否超壓運行,石油是否錯了,石油是否老化,甚頭部軸承問題是否結束摩擦。
　　Is there any grease in the radiator? If the temperature difference is within the normal range, the machine is still at high temperature, indicating that the heat head generated is beyond the normal range, we should check whether the overpressure operation, whether the oil is wrong, whether the oil is aging, and even whether the head bearing problem ends friction.