T165-1
T165-1推土機性能簡介
T165-1 Bulldozer
T165-1推土機係半剛性懸掛、機械傳動、液壓操縱的履帶推土機。可用於道路修築、水電工程、農田改造、港口建設礦山開發及其它建築工程項目的土石方作業。
T165-1 bulldozer is semi-rigid suspended, power shift, hydraulically controlled and track-type. It is applicable for road construction, water and electricity engineering farmland leveling, port building, mining and other engineering conditions.
主機性能參數
Main specifications
外形尺寸(長×寬×高) 5336×3297×2882 mm (直傾鏟)
5336×3726×2882 mm (角鏟)
使用質量 16.9t(直傾鏟)；17t(角鏟)
飛輪功率 121 kW
最大牽引力 132.5 kN（直傾鏟）；133.3kN（角鏟）
(有效牽引力取決於機重和地麵附著性能)
接地壓力（使用質量） 64.4KPa
最小轉彎半徑 3.9 m
最小離地高度 352.5 mm
坡行角度 縱向 30度 橫向 25度
單鏟容量 4.5 m3(直傾鏟);4.9m3 (角鏟)
Overall dimensions (L×W×H) : 5336×3297×2882 mm (straight)
5336×3726×2882 mm (angle )
Operation weight: 16.9t(straight);17t(angle )
Flywheel power: 121kW
Max. drawbar pull: 132.5 kN（straight）；133.3kN（angle）
(The efficient force depends on weight and ground surface adherence)
Ground pressure (at operating weight): 64.4KPa
Min. ground radium: 3.9 m
Min. ground clearance: 352.5 mm
Grade ability: Straight 30°
Side 25°
柴油機
Diesel engine
製造廠家： 濰坊柴油機股份有限公司
型號 WD615T1-3B
形式 直列、水冷、四衝程、增壓、直噴
缸數--缸徑×行程 6-126×130
總排量 9.726L
額定轉速 1800 r/min
標定功率 130 kW
最大扭矩/轉率 870N·m/1200-1300rpm
燃油消耗量（標定功率） ≤225 g/kW·h
機油消耗量 ≤1.8 g/kW·h
許用海拔 ≤4000m
冷卻方式 閉式循環水冷卻
啟動方式 24V電啟動
Manufactured factory: WEIFANG DIESEL ENGINE CO.,LTD
Model: WD615T1-3B
Type: straight line, water-cooled, with four stroke, pressure boost and direct injection
Cylinders Number-bore diameter×travel distance: 6-126x130mm
Displacement: 9.726 L
Rated RPM: 1800 r/min
Rated power: 130 kW
Max. torque 870 N·m/1200-1300 rpm
Fuel consumption (at rated working condition)
225 g/kW·h
oil consumption: 1.8 g/kW·h
Admissible altitude ≤4000m
Cooling method: closed circulation water cooled
Starting method: electrically starting at 24V pressure
製造廠家： 上海柴油機股份有限公司
型號 G128ZG8
形式 直列水冷四衝程增壓
缸數--缸徑×行程 6-135×150
總排量 12.88 L
額定轉速 1800 r/min
標定功率 130 kW
最大扭矩/轉速 838 N·m/1260 rpm
燃油消耗量（標定功率） 224 g/kW·h
機油消耗量 0.7 g/kW·h
許用海拔 ≤4000m
冷卻方式 閉式循環水冷卻
啟動方式 24V電啟動
Manufactured factory: SHANGHAI DIESEL ENGINE CO.,LTD
Model: G128ZG8
Type: straight line, water-cooled, with four stroke,
Cylinders Number-bore diameter×travel distance: 6-135x150mm
Displacement: 12.88 L
Rated RPM: 1800 r/min
Rated power: 130 kW
Max. torque 838 N·m/1260 rpm
Fuel consumption (at rated working condition)
224 g/kW·h
oil consumption: 0.7 g/kW·h
Admissible altitude ≤4000m
Cooling method: closed circulation water cooled
Starting method: electrically starting at 24V pressure
主離合器與變速箱
Main clutch and transmission
主離合器為常開式，多片濕式粉末冶金摩擦片，液壓助力操縱。
變速箱采用常齧合，斜齒輪傳動，結合套換檔，雙杆機械操縱。前進五檔，後退四檔。
行駛速度：（柴油機1800r/min時理論速度）
前進：一擋 2.5km/h 後退：一擋 3.5km/h
二擋 3.3km/h 二擋 4.6km/h
三擋 5.7km/h 三擋 7.9km/h
四擋 7.5km/h 四擋 10.5km/h
五擋 10.6km/h
The flywheel clutch is constantly disengaged with muti-powder-metal discs, which is operted by hydraulically boosting,.
The transmission is mechanical double levels controlled with constantly meshed helical gears, and coupling sleeve shift. It has five speeds FORWARS and four speeds REVERSE .
Travel speed (in theory 1800r/min engine speed)
Forward Reverse
First speed 2.5km/h First speed 3.5km/h
Second speed 3.3km/h Second speed 4.6km/h
Third speed 5.7km/h Third speed 7.9m/h
Forth speed 7.5km/h Forth speed 10.5km/h
Fifth speed 10.61km/h
轉向與製動
Steering and braking
轉向離合器為濕式、多片、粉末冶金摩擦片、彈簧壓緊、液壓分離。
製動器為濕式、浮動、雙向帶式、腳踏式機械操縱.
The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.
The brakes are oil, two-direction floating band with mechanism foot pedals。
最終傳動
Final drive
兩級直齒輪減速，浮動油封密封，鏈輪采用組合式，便於維修。
The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service.
行走係統
Undercarriage system
行走架為槽鋼焊接矩形截麵，八字梁型式。支重輪、托鏈輪、引導輪均裝有密封性好、壽命長的浮動油封。
支重輪（每側）
單邊 四個
雙邊 二個
托鏈輪（每側） 二個
引導輪（每側） 一個
履帶型式 單履齒組合式
履帶漲緊型式 液壓漲緊
節矩 203 mm
履帶板數（每側） 38 塊
履帶板寬 500 mm
履帶接地長度 2570 mm
密封和潤滑履帶▲
該履帶的節距、履帶板數、履帶板寬與普通的履帶相同。
Inner and outer beam of track roller frame are rectangular section “八”frame .Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal.
Track roller (each side):
Singe flange 4
Double flange 2
Carrier roller(each side): 2
Idler (each side) 1
Type of track: single grouser combined
Tension mode of track: hydraulic
Pitch: 203mm
Number of shoes(each side) 38 pieces
Width of shoe 500mm
Length of track on ground 2570mm
Sealed and lubricated track ▲
The pitch , numbers and width of track shoes are the same with the general track.
工作裝置液壓係統
Implement hydraulic system
由裝置油泵、液壓油箱及各種閥、油缸、濾油器和管路組成。
油泵型式 齒輪油泵
油泵型號 CBF-E100A （反）
係統流量 180 L/min
係統壓力 11.76 MPa
單閥（內置）：用於角鏟、推煤鏟。可實現鏟刀油缸的提升、封閉、下降、浮動。
雙閥（內置）：用於直傾鏟。可實現鏟刀油缸的提升、封閉、下降、浮動，同時實現側傾缸左側傾、右側傾、封閉。
雙閥（一個內置、一個外置）：用於角鏟、鬆土器。可實現鏟刀油缸的提升、封閉、下降、浮動，鬆土油缸可實現提升、封閉、下降。
三閥（二個內置、一個外置）：用於直傾鏟、鬆土器。可實現鏟刀油缸的提升、封閉、下降、浮動，同時實現側傾缸左側傾、右側傾、封閉。鬆土油缸可實現提升、封閉、下降。
Hydraulic system of the implement
It consists of implement pump , hydraulic tank and various valves , cylinders , filters and lines .
Pump type gears oil pump
Pump model CBF-E100A(reverse)
System output 180L/min
System pressure 11.76MPa
Single valve(built in):used in angle blade, coal pushing blade to control lift, hold, lower, float for the blade cylinder.
Double valve (built in: used in straight blade to control lift, hold, lower. Float for blade cylinder, at same time to realize left tilting, right titling, hold of titling cylinder.
Double valve (one built-in, another at outside): used in angle blade, ripper to realize lift, hold , lower, float for the blade cylinder and to realize lift, hold, lower for the ripper cylinder.
Three valves: (two built-in, one at outside) used in straight blade to realize lift, hold, lower, float for blade cylinder at same time to realize left titling, right tilting, hold for titling for titling cylinder. Ripper cylinder can move to lift. Hold, lower positions.
駕駛室
Cab
噪音低、視野寬闊、可調式的司機座椅，並配備電風扇。
備有以下駕駛室供用戶選用
1. 帶空調器的駕駛室。
2. 翻車保護司機涼棚。
3．簡易司機涼棚。
The cab with adjustable seat features low noise and wide visible range and contains electrical fan.
This following different kinds of cabs as follow can be chosen:
1. Cab with air-conditioner
2. Cab with Rops
3. Simple structure canopy
加注容量
Service refill
加注部位 容量（L）
水箱及柴油機冷卻水 60
柴油機潤滑係統用油 25
分動箱、主離合器用油 35
變速箱、後橋傳動用油 90
最終傳動用油（單側） 24
工作裝置液壓係統用油 85
柴油箱裝柴油 230
支重輪、托鏈輪、引導輪用油（每個） 0.35
Fill location Capacity(L)
Radiator and diesel engine water: 60
Lubricating system of diesel engine Oil: 25
Flywheel house, main clutch oil 35 ,
Transmission, bevel gear case Oil: 90
Final drive(each side) Oil: 24
Implement hydraulic system Oil: 85
Fuel tank Oil: 230
Idle track roller, carrier roller, front idler(each) Oil: 0.35
推土鏟主要參數
Blade specifications
鏟刀型式 角鏟 直傾鏟 推煤鏟
Blade Angle Straight Coal pushing
鏟刀寬度（Width） 3762mm 3297 mm 4240mm
鏟刀高度（Height） 1140mm 1170 mm 1150mm
最大切削深度（Max digging depth）: 400mm 400mm
最大提升高度（Max. ground clearance）:1000mm 915mm 1000mm
垂直傾斜角(Vertical tilting angle): 9° 8.5° 9°
鬆土器主要參數：
Ripper specifications
鬆土齒數(Number of shand) 3個 1
長(length) ： 1580mm 1580mm
寬(width)： 2020mm 1090mm
高(Height)： 1236mm 1236mm
最大鬆土深度： 550mm 550mm
(Max penetration)
最大提升高度： 510mm 510mm
(Max clearance)
注：▲表示可選購物
Note: ▲indicates optional parts
