朝鮮核試 汽車方向機助力泵試驗台Car direction machine

該方向機助力泵試驗台是根據汽車動力轉向器（俗稱液壓方向機）專用標準《QC/T306-1999汽車動力轉向控製閥總成台架試驗方法》及《QC/T529-2000汽車動力轉向器總成台架試驗方法》設計要求等相關標準。並依據動力轉向器和轉向助力泵所出現的故障而設計的，集動力轉向器及轉向助力泵維修、檢測為一體的動力轉向器綜合性能檢測台。該檢測設備操作簡單、維護方便、檢測精度高。經本檢測台檢測的動力轉向器和轉向助力泵合格率達到。

該方向機試驗台采用油壓係統，主機變頻調速，轉速任意預置，計算機與數字表雙控雙顯，試驗油恒溫控製。

主要檢測方向機助力的對稱度，左右扭矩，內漏，轉向，單邊沉重。轉向助力泵的工作壓力，流量，密封性及相關閥的密封性等各種液壓轉向係統故障。采用液壓泵隨時可以調節液壓係統的工作狀況檢測元器件的各種參數。特別適應載重車輛液壓轉向及工作性能的檢測和試驗。該機采用壓力儀表顯示轉矩、工作壓力等各種參數。

調整項目：

轉向沉重、衝擊振動、操縱不穩、轉向回跳、轉向噪聲、油液滲漏。13854822395 鄒經理

型號

功率(Kw)

電源(V)

計算機控製

轉速(r/mm)

溫控係統

液壓泵(MPa)

扭矩(N.m)

轉向圈數

轉角(oC)

FXJ-I

4

5.5

7.5

380

220

X

0-4000

√

0~15

0~4200

0~9999.9

±45

FXJ-II

√

0-4000

FXJ-III

X

950

The direction machine test rig adopts hydraulic system, the host frequency control of motor speed, speed, any preset computer and digital meter double charged with double show, test oil temperature control electronic display the location of the fuel tank and oil temperature.

The main direction of the detection of various machine symmetry of the booster pump, control torque, internal leakage, steering, unilateral heavy. Steering booster pump working pressure and flow, sealing and related valve sealing and so on all kinds of hydraulic steering system failure. Using hydraulic pump can be adjusted at any time of the working condition of the hydraulic system test components parameters. Especially to adapt to the load vehicle hydraulic steering and the working performance of the inspection and test. The machine USES pressure instrument display torque, work pressure and other parameters. Through the sensor display orientation machine and hydraulic booster pump flow of timely work pressure oil temperature, etc.

Adjust the project:

Steering heavy, impact vibration and manipulation of the instability, to rebound, steering noise, oil leakage

Product main performance: