供應ZX5-晶閘管直流弧焊機

名　　稱： ZX5-晶閘管直流弧焊機
型　　號： ZX5-400A ZX5-500A ZX5-630A
產品介紹：  
*采用銅芯變壓器，性能穩定，適用壽命長
*適用各牌號酸堿性、堿性焊條
*強力風冷，可作碳弧氣刨適用
*配備遙控盒，設計周到，方便操作
*對電網補償能力強，且在冷熱態下都能保持電流的穩定
*電弧穩定，飛濺小，熔池深，焊縫成形美觀
*具有引弧電流和推力電流，易起弧且不粘焊條
*具有陡降的靜外特點，動特性好
*可焊接碳鋼，低碳鋼，合金鋼
*還可用於除手工弧焊外的自動和半自動焊接電源

技術參數：                               
型號   ZX5-400A ZX5-500A ZX5-630A
電源電壓(V)  三相380 三相380 三相380
額定輸入容量(KVA) 21 30.5 39.5
空載電壓(V)  65 65 82
額定焊接電壓(V)  21.6-36 21.6-40 21.6-45.2
負載持續率（%） 60 60 60
電流調節範圍（A） 40-400 40-500 50-630
電網電壓波動補償度 ±4% ±4% ±4%
功率因數 0.74 0.76 0.78
外形尺寸（mm） 650*520*840 650*520*840 725*575*910
重量（kg） 176 180 228
 
ZX5—THYRISTOR DC ARC WELDER

●  Adopting copper core transformer.
●  Apply various brand acid and basic welding rods.
●  With powerful air-cooling, it can be used as carbon arc gas gouging.
●  Equipped with a remote-control box, so it is considerate in design and convenient in operation.
●  With strong compensation ability to the electrical network, it can keep stable current under both cold and hot sates.
●  With stable electric arc, little splash, deep molten bath, and beautiful welding seam.
●  With arc starting current and thrust current, it is easy for arc starting, with no welding rod adhesion.
●  With steep dropping static external characteristic, and good dynamic characteristic.
●  Suitable for welding of carbon steel, low carbon steel, and alloyed steel.