供應幹混砂漿站，混凝土攪拌站，臂架泵車，輸送泵,輸送車。

產品類別：混凝土機械 > 拖式混凝土泵

產品規格：HBTS80-16ER,HBTS80-16ERI

產品信息：液壓管路選用高性能無縫鋼管，精良的焊接工藝確保管路無滲漏現象，所有的高壓軟管均采用美國Parker或Aeroquip產品。並采用了獨特的扣管技術，確保無爆管、無滲油現象。

 

主要特點
Main Feature:
液壓係統 Hydraulic system:
◎ 采用全新的開式液壓係統及專有的液壓緩衝技術，使得係統換向衝擊小，發熱少。同時選用世界原裝重載液壓主泵及液壓閥，主泵排量大，液壓閥通徑大，從而確保砼泵的安全與可靠性。
◎ 液壓回路采用獨特的全程三級高低壓過濾係統，同時采用自動加油及旁路自循環係統，在方便加油的同時，對新油進行精過濾，防止人為汙染。從而確保油泵、閥組、馬達、油缸的低故障與高可靠性。
◎ 獨特的油箱設計及風、水冷卻係統，確保在高溫環境中連續工作，油溫不超過75℃。
◎ 液壓管路選用高性能無縫鋼管，精良的焊接工藝確保管路無滲漏現象，所有的高壓軟管均采用美國Parker或Aeroquip產品。並采用了獨特的扣管技術，確保無爆管、無滲油現象。
◎ 高壓管路的連接處采用新型的法蘭式連接，具有耐衝擊、強度高、無滲漏、安全、易拆裝等特點。
◎ 大容量高壓蓄能器的采用，及其良好緩衝性能設計，使得擺動係統強勁有力。擺動力矩是同類型號的兩倍以上。大大降低了S管閥對砼介質的要求，對施工中的墊層砼同樣泵送自如。
◎ 整機潤滑係統采用自動潤滑，運行可靠。獨特的砼缸自潤滑設計，確保砼缸與活塞的低磨損與長壽命。
◎ It adopts an entirely new open-hydraulic system and proprietary hydraulic buffer technology resulting in the small impact and low fever of system commutation. Meanwhile, it uses the world`s top-class original overload hydraulic pump with a high displacement and hydraulic valve with a big size so as to ensure the safety and reliability of the pump.
◎ The hydraulic circuit adopts the unique high-low pressure filtration system and meanwhile exclusively uses the automatic refueling and bypass circulatory system. This is not only convenient for refueling but also prevents man-made pollution by filtering the new oil so as to ensure the low fault and high reliability of the pump, valve block, motors and fuel tanks.
◎ The unique design of fuel tank and the cooling system of wind and water can ensure the continuous work in the high-temperature environment. The oil temperature does not exceed 75℃
◎ The hydraulic piping selects the seamless steel tube with high-performance and excellent welding technology to ensure non-leakage of the pipe. All the high-pressure hoses adopt the products of American Parker or Aeropuip. Besides, it adopts the unique technology to ensure non-explosion and non-leakage.
◎ The joint of the high-pressure pipeline adopts the new flange linkage which boasts of many good characteristics such as impact-resistance, high strength, no leakage, security and accessibility of assembling.
◎ The adoption of high-pressure accumulator with large-capacity together with its good buffer performance design makes the swing system even more powerful. The swing moment is more than two times of the similar models. This greatly reduces the S valve`s requirements of the medium concrete and also pumps the cushion concrete smoothly in the construction.
◎ The lubrication system of the machine lubricates automatically and operates reliably. The unique lubrication design of concrete cylinder can ensure the low wearing and long life of the concrete cylinder and piston.

泵送係統Pumping system:
◎ 料鬥采用世界新型的錐形結構設計，提高砼的流動性與定盈係數，大大提高砼缸對砼的吸入效率，不僅提高泵送效率，而且降低了造成間接堵管的可能性。
◎ S管曲線優化設計，使砼在S管內流動性好，壓力損失 小，同時S管采用耐磨鋼製造，內膛底部堆焊耐磨合金層，從而實現S管的長壽命。
◎ 料口端的兩級變徑設計，可限度的將砼的變徑壓力釋放在輸送管內，減少S的壓力損失與出口處的壓力集中，極大的提高了S管出口的耐磨壽命。同時，采用了變徑管與出口的法蘭式連接，有效降低了泵送衝擊、顫動現象，消除了卡箍式連接帶來的安全隱患。
◎ 大扭矩的攪拌係統不僅扭矩大，而且便於拆裝的攪拌軸設計，極大地方便了客戶的維修攪拌葉片采用耐磨合金三麵堆焊工藝，確保其高壽命。
◎ 關鍵件采用西門子（SIEMENS）元件，強弱電基於一體，不幹擾，采用模塊化設計，體積小，確保電控係統工作可靠。
◎ 係統中的每一個動作均設有手動按鈕，便於整機維修，更換係統內零件。操作係統采用近控、遠控與人工控製三種操作方式，不僅方便現場施工，而且在任何兩種方式同時出現故障的情況下仍能正常泵送。同時，設有急停開關，以防止不測情況發生。
◎ 控製元件采用西門子LOGO，接近開關損壞時也能工作。
◎ 整個電器箱表麵采用噴塑工藝，美觀易清理。
◎ The hopper adopts the design of the world`s latest cone-shaped construction to enhance the mobility of the concrete and surplus factor. It can highly increase the inhalation efficiency of concrete to concrete cylinder. This not only improves the pumping efficiency but also lowers the possibility of indirect blocking.
◎ The optimal design of S-tube curve enables the concrete to flow smoothly inside S-tube with low pressure loss. Meanwhile, the wear-resistant steel construction of S-tube with wear-resistant alloys at the bottom of internal chamber ensures the long life of S-tube.
◎ The two-stage adjustable design of the charging hole can release the adjustable pressure of concrete in the pipeline to a maximum degree and therefore reduce the pressure loss of S-tube and pressure concentration of the outlet and highly increase the durability of S-tube`s outlet. Meanwhile, the flange connection of adjustable tube and its outlet can effectively reduce the impact and vibrating of pumping and therefore remove the hidden safety danger of hoop linkage.
◎ The great torque of mixing system and the stirring shaft`s design of easy disassembly and assembly greatly facilitate clients` maintenance. The stirring blades adopt the overlaying technology of wear-resistant alloys so as to ensure its long life expectancy.
◎ The key components use the Siemens components. The strong and weak electricity are integrated without any interference. The modular design and small size can ensure the reliability of electronic control system.
◎ Each activity in the system is equipped with a manual button which is convenient for the machine`s maintenance and replacement of the components. The operation system adopts three operational methods such as short-range control, long-distance control and manual control, which not only facilitates on-the-spot construction but also ensures the normal pumping when any two methods break down. Besides, the exigency stop switch can prevent accidents.
◎ The control component uses the Siemens LOGO which can still work when the switch is nearly damaged.
◎ The entire surface of the electrical boxes adopts spray technology which is attractive in appearance and easy to clean.

主要技術參數 Main Technical Parameters: